Shrink Wrap Bio-Film - Biolefin

  Please choose between perforated or non-perforated wrap.  Note-soaps can still be smelled through non-perforated wrap.  Just need the biofilm?  Order Here!  What is included with the system? Heat resistant pad - no heat damage to underlying surfaces. Cushioning pad - goes underneath the dispenser to protect against any damage and to make sealing the film with the wand easier on less than optimal surfaces. Full 36" wide and rolls up for space-saving storage! Giving you almost 3 times the working surface! Instructional video - link or CD. Shrink wrap film carrier/dispenser - supports and protects the roll of film, allowing it to be rolled out without spooling. There is a special dividing bar on the carrier that separates the two layers of film as you dispense it, so no static charge while trying to separate them. Professional dual-temp heat gun - high and low settings. Specially designed for shrink packaging. Much easier and less tiring than older, heavier models that don't offer any better service. A FULL roll of 500' 60 gauge biodegradable Polyolefin centerfold shrink film. Biolefin is FDA approved for direct food contact   ****MUST BE SHIPPED****

Clear Melt and Pour Soap Base from SFIC is a wonderful base material to work with when crafting your own soaps!  This versatile base can be made opaque with the use of Titanium Dioxide, which gives it a more "real" soap look.  Clear Melt and Pour Soap Base is sold by weight. Available in 1 lb wrapped blocks or as randomly cut, easy to work with pieces.   Clear Melt and Pour Soap Base Ingredients Coconut OilSustainable Palm OilSafflower OilGlycerine (kosher, of vegetable origin)Purified WaterSodium Hydroxide (saponifying agent)SorbitolPropylene Glycol (made from vegetable glycerine)Sorbitan oleate (emulsifier)Oat protein As many customers have inquired about process aids, we offer the following information: Our process aids are used in small amounts, on an as needed basis, and are not essential for product function. They are subject to change as they are constantly evolving and changing due to the availability of newer and better materials, marketplace demands, etc. In order to provide our customers with various desired features such as ease of remelting and re-batching, finished product final appearance, etc. we may or may not use small amounts of the following (or similar) materials: Bio Propylene Glycol (made entirely from vegetable glycerine). This material is often omitted but we have also listed it as an ingredient as larger amounts are sometimes used.  ****Excluded in FREE soap bases: Cocamidopropylamine Oxide (made from renewable vegetable sources), Disodium Sulfosuccinate (made from renewable vegetable sources), Cocamidopropyl Betaine (made from renewable vegetable sources). ***All the above materials are biodegradable. SLS or SLES are not used.   ***NOTE***Melt and Pour Soap base may arrive a bit brittle due to freezing in transport.  We are in WI so there is nothing we can do about that.  Chances are very good your base will have frozen at some point.  The base will be fine.  You should test a small amount before making a larger batch by heating in the microwave and cutting.  If brittle from freezing - Single Pour Bar Soap (not cutting from a loaf) -  No special treatment is necessary.  Can be used "as is" and the finished bar will be harder than normal/last longer. Or you can add 3-5% water or glycerine to bring the soap back to original texture. Loaf Soap (Will be sliced)  - To soften the soap for slicing add water or glycerine at about 7% - 10% for nice slices.  You can use an even higher amount but test prior to putting in colors/fragrance since you can always remelt add more soap etc.  Remember adding more glycerine will increase sweating but also makes a more moisturizing soap.

Organic Oil Clear Melt and Pour Soap Base: Certified Organic Oils of Palm and Coconut have been used in our regular clear and white formulations. Please note these are made with organic oils but are not certified organic soap as a whole.Sold by weight. Randomly cut easy to work with pieces.   Organic Oil Soap Ingredients Organic Coconut OilSustainable Palm Oil Glycerine (kosher, of vegetable origin)Purified WaterSodium Hydroxide (saponifying agent)SorbitolPropylene Glycol (made from vegetable glycerine)Sorbitan Oleate (emulsifier)Oat protein ****If you want a white soap add Titanium Dioxide (mineral whitener used in opaque soaps)As many customers have inquired about process aids, we offer the following information: Our process aids are used in small amounts, on an as needed basis,and are not essential for product function. They are subject to change as they are constantly evolving and changing due to the availability of newer and better materials, marketplace demands, etc. In order to provide our customers with various desired features such as ease of remelting and re-batching, finished product final appearance, etc. we may or may not use small amounts of the following (or similar) materials: Bio Propylene Glycol (made entirely from vegetable glycerine) This material is often omitted but we have also listed it as an ingredient as larger amounts are sometimes used. ****Excluded in FREE soap bases Cocamidopropylamine Oxide (made from renewable vegetable sources) Disodium Sulfosuccinate(made from renewable vegetable sources) Cocamidopropyl Betaine made from renewable vegetable sources) ***All the above materials are biodegradable. SLS or SLES are not used.   ***NOTE***Melt and Pour Soap base may arrive a bit brittle due to freezing in transport.  We are in WI so there is nothing we can do about that.  Chances are very good your base will have frozen at some point.  The base will be fine.  You should test a small amount before making a larger batch by heating in the microwave and cutting.  If brittle from freezing - Single Pour Bar Soap (not cutting from a loaf) -  No special treatment is necessary.  Can be used "as is" and the finished bar will be harder than normal/last longer. Or you can add 3-5% water or glycerine to bring the soap back to original texture. Loaf Soap (Will be sliced)  - To soften the soap for slicing add water or glycerine at about 7% - 10% for nice slices.  You can use an even higher amount but test prior to putting in colors/fragrance since you can always remelt add more soap etc.  Remember adding more glycerine will increase sweating but also makes a more moisturizing soap.

Organic Oil White Melt and Pour Soap Base: Certified Organic Oils of Palm and Coconut have been used in our regular clear and white formulations. Please note these are made with organic oils but are not certified organic soap as a whole.Sold by weight. Randomly cut easy to work with pieces. Organic Oil Soap Ingredients Organic Coconut OilSustainable Palm Oil Glycerine (kosher, of vegetable origin)Purified WaterSodium Hydroxide (saponifying agent)SorbitolPropylene Glycol (made from vegetable glycerine)Sorbitan Oleate (emulsifier)Oat proteinTitanium Dioxide (mineral whitener used in opaque soaps) As many customers have inquired about process aids, we offer the following information: Our process aids are used in small amounts, on an as needed basis,and are not essential for product function. They are subject to change as they are constantly evolving and changing due to the availability of newer and better materials, marketplace demands, etc. In order to provide our customers with various desired features such as ease of remelting and re-batching, finished product final appearance, etc. we may or may not use small amounts of the following (or similar) materials: Bio Propylene Glycol (made entirely from vegetable glycerine) This material is often omitted but we have also listed it as an ingredient as larger amounts are sometimes used. ****Excluded in FREE soap bases Cocamidopropylamine Oxide (made from renewable vegetable sources) Disodium Sulfosuccinate(made from renewable vegetable sources) Cocamidopropyl Betaine made from renewable vegetable sources) ***All the above materials are biodegradable. SLS or SLES are not used.   ***NOTE***Melt and Pour Soap base may arrive a bit brittle due to freezing in transport.  We are in WI so there is nothing we can do about that.  Chances are very good your base will have frozen at some point.  The base will be fine.  You should test a small amount before making a larger batch by heating in the microwave and cutting.  If brittle from freezing - Single Pour Bar Soap (not cutting from a loaf) -  No special treatment is necessary.  Can be used "as is" and the finished bar will be harder than normal/last longer. Or you can add 3-5% water or glycerine to bring the soap back to original texture. Loaf Soap (Will be sliced)  - To soften the soap for slicing add water or glycerine at about 7% - 10% for nice slices.  You can use an even higher amount but test prior to putting in colors/fragrance since you can always remelt add more soap etc.  Remember adding more glycerine will increase sweating but also makes a more moisturizing soap.